Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-Z8910SP User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
16
6.2 Wireless remote configuration function
The module supports the remote configuration function, which is identified by the two-byte wireless configuration ID by
default as A8 8A. The user can modify the remote configuration ID of the module. When the first two bytes of the
wireless air data received by the module are the wireless configuration ID, The module judges that the data packet is a
remote configuration command and executes the operation corresponding to the command. The data packet will not be
output through the serial port. The remote configuration of the dormant terminal needs to wake up first.
6.3 Function parameter description
The module provides a wealth of configurable parameters, which can be used flexibly according to actual application
requirements to construct different forms of networks.
Configurati
on
informatio
n
Attributes
Parameter range
Function Description
PANID
Read/Write
0x0000
～
0xFFFF PANID is the network identifier of ZIGBEE, which is
used to determine the identity of the network to which it
belongs. The PANID of all devices in the same network
must be the same. When the terminal or router is
configured as 0xFFFF, it can join any network where
the same channel already exists;
Local
network
address
Read
0x0000
～
0xFFFF It is used to distinguish each node in the network. Each
device is in the same network. The local network
address must be unique. When not joining the network,
the network address of the device is 0xFFFF. After
joining, the short address of the device is assigned by
the coordinator. The coordinator is fixed as: 0x0000;
Network
status
Read
0
、
2
、
3
Indicates the network status of the current device,
including no network, has successfully joined the
network, there is a network without a parent node;
Destination
network
address
Read/Write
0x0000
～
0xFFFF The current device communication target (short address)
can be switched at any time through configuration
commands;
Local MAC
address
Read
64bitMAC
The MAC address allocated by the network of this
module cannot be changed by the user (re-entry to the
network to change)
Destination
MAC
address
Read/Write
64bitMAC
In fixed-point mode, use long address to send
Equipment
Read/Write
C
、
R
、
E
、
S
They are: coordinator, router, non-sleeping terminal,
