Ebyte E103-W10 User Manual Download

Page: 2 / 22

Chengdu Ebyte Electronic Technology Co.,Ltd.

E103-W10 User Manual

，

Chengdu Ebyte Electronic Technology Co.,Ltd.

Disclaimer.............................................................................................................................................................

1 Introduction........................................................................................................................................................

1.1 Brief Introduction........................................................................................................................................3
1.2 Features....................................................................................................................................................... 3
1.3 Application..................................................................................................................................................3

2 Specification and parameter...............................................................................................................................

2.1 Limit parameter...........................................................................................................................................4
2.2 Operating parameter....................................................................................................................................4

3 Size and pin definition.......................................................................................................................................

4 Recommended wire diagram.............................................................................................................................

5 Operating guidance............................................................................................................................................

5.1 As TCP Client, single connection...............................................................................................................7
At the same time, the PC-side "TCP-UDP Test Tool" displays the connection window:..............................11
5.2 As TCP server, single connection.............................................................................................................12

6 Network description.........................................................................................................................................

7 AT command...................................................................................................................................................

8 FQA..................................................................................................................................................................

8.1 The transmission distance is not ideal.......................................................................................................18
8.2 Module is easy to be damaged.................................................................................................................. 18
8.3 BER(Bit Error Rate) is high......................................................................................................................18

9 Production guidance.........................................................................................................................................

9.1 Reflow soldering temperature...................................................................................................................19
9.2 Reflow soldering curve............................................................................................................................. 19

10 Related module..............................................................................................................................................

11 Antenna recommendation..............................................................................................................................

Revision history..................................................................................................................................................

About us..............................................................................................................................................................

Summary of Contents for E103-W10























Search results

Summary of Contents for E103-W10

Reviews:

Related manuals for E103-W10

Brands by name

Popular brands

Ebyte E103-W10, User Manual

Search results

Summary of Contents for E103-W10

Reviews:

Related manuals for E103-W10

Brands by name

Popular brands