Ebyte 400SL37 User Manual Download

Page: 2 / 25

Chengdu Ebyte Electronic Technology Co., Ltd.

ChengduEbyteElectronicTechnologyCo,;Ltd

Contents

1. Introduction.................................................................................................................................................................3

2. Quick Start.................................................................................................................................................................. 4
3. Dimensions..................................................................................................................................................................6

3.1 Parts description....................................................................................................................................................6

4. Interface definition......................................................................................................................................................9

5. Technical specification..............................................................................................................................................10

6. Function Description.................................................................................................................................................12

6.1 Fixed Transmission.............................................................................................................................................12
6.3 Broadcast Address...............................................................................................................................................12

7. Operating mode.........................................................................................................................................................13

.................................................................................................................................. 13

7.2 Configuration mode (mode 2)............................................................................................................................ 14

8. Register read and write control.................................................................................................................................14

8.1 Command format................................................................................................................................................ 14
8.2 Register description............................................................................................................................................ 15
8.3 Factory default parameter................................................................................................................................... 18

9. Repeater networking mode....................................................................................................................................... 18
10. Configuration instructions on computer.................................................................................................................19
11. Programming the modem........................................................................................................................................21

11.1 Connection diagram.......................................................................................................................................... 21

Summary of Contents for 400SL37

























Search results

Summary of Contents for 400SL37

Reviews:

Related manuals for 400SL37

Brands by name

Popular brands

Ebyte 400SL37, User Manual

Search results

Summary of Contents for 400SL37

Reviews:

Related manuals for 400SL37

Brands by name

Popular brands