
LX20B – Manual
Page 14 / 67
4.
QUICK START PROCEDURE
NOTE:
Do not insert SIM card before the first programming of transmitter as it
may block the card if PIN code is required for the card.
This chapter is purposed for users that possess experience regarding GPRS
/ UMTS / HSPA (3G) data transmission systems and who work with
OSM.Server receiver for monitoring system. Other users shall skip this
chapter and go to chapter 5 of this Manual.
As many users possess protected facilities spread at vast locations, local
programming of transmitter is not always available (with PC computer and
programming cable).
Two phases comprise programming in this option:
a)
sending to transmitter of main parameters (with SMS) that enable connection
to receiver (OSM.Server system).
b)
full configuration of device with remote programming (GPRS transmitter
configurator and OSM.Server).
Quick start procedure:
a)
insert into device SIM card with PIN code 1111 or disabled PIN code,
b)
connect power supply for module,
c)
send to SIM card number with SMS parameters related to connection of
device to receiver (OSM.Server)
d)
waiting for moment, when device indicates connection to OSM.Server
Note:
Connection to receiver is possible if the device was registered into it.
Registration procedure has been described in OSM.Server Operation Manual.
e)
complete, remote programming with GPRS transmitter configurator.
SMS text message shall provide the following information:
<transmitter’s service code>
█
SERVER=
<server address>
█
PORT=
<server port>
█
APN=
<access point name>
█
UN=
<user ID number>
█
PW=
<user password>
Where:
█
: space (every parameter shall be separated with space – blank character)
<transmitter’s service code>
: factory settings –
1111
<server address>
: address of communication server purposed for collection of
transmitter signals e.g. 89.123.115.8. In case address is provided as domain e.g.
block.autostrada.com, SMS message shall include DNS1 parameter (address of main
DNS server)
<server port>
: Number of port in server that receives messages from a device
<access point name>
: defines access point name to GSM network.
If private network is used, SMS message shall provide the following parameters:
UN=
<user ID number>
and PW=
<user password>
.
Summary of Contents for LX20B
Page 57: ...LX20B Manual Page 57 67...