30
EN
EBS Ink-Jet Systeme
20111028#4.2
EN
User Support
Problems with Functioning and
Operation of the Printer
Some of the nozzles do not jet ink
Rinse the nozzles
Some drops are missing on a print.
or
6
Aim the nozzle outlet at a vessel,
for example the one you use to
wash the printer.
6
Wash the nozzles with wash-up,
if they are covered with dried ink.
6
Start the rinse-the-nozzle func-
tion. Press release button
times and hold it down for a few
seconds. This causes all elec-
tromagnets in the head to open
and ink to pour out at pressure
after a warning buzzing signal
has been generated by buzzer
!
6
When ink starts jetting regularly
out of each nozzle, release but-
ton
!
Frequent and long-lasting use of the
rinse function increases ink con-
sumption.
The printer does not print
On starting printing and making an
attempt to print you can hear the
electromagnets of the nozzle valves
operating but ink drops are not always
jetted out of the nozzles properly. The
quality of printing deteriorates or no
print is produced.
After about 100 ink containers (or
over 10 litres of ink) have been con-
sumed, however not less frequently
than every four years, the built-in ink
filter should be checked and replaced,
if need be. It is recommended that the
replacement operation be performed
by qualified or EBS service staff.
Boldfaced or Blurred Prints
The print is heavily saturated with ink,
ink drops blur and the entire print
seems to spread over the object be-
ing labelled.
Decrease the setting of the
Dot size
parameter by moving the parameter
slider to the left.
Questions and Problems
If these Instructions and other support
in the form of electronic files con-
tained on the installation CD, which
has been delivered together with the
printer, do not provide answers to all
your questions, then:
6
look through the web site of the
printer’s manufacturer,
EBS Ink-Jet Systeme and try to
find the answers to your queries,
6
try asking the question to the
manufacturer’s representative,
6
present the problem in the con-
tact form available on the manu-
facturer’s web site and forward
the form following the instructions
given therein.
Electronic Guides
Some operating instructions and
programming operations are pre-
sented via interactive creators/guides
available from the
Guides
menu of
the control program. The creators are
installed together with the control
program.
