CPX200NW ALARM CONTROL UNIT – USER MANUAL
25 / 28
EN
Getting a text message content and a phone number assigned to the
event
Command syntax
XXXX GETUSERSMS=EVENT
Command description
Getting the content of a text message and a phone
number assigned to the specified event.
XXXX – user code
EVENT – a short name of the event, possible event
names are listed at the end of this chapter
Example:
1234 GETUSERSMS=ARM1
Feedback message
GETUSERSMS=EVENT:TELNUM,MSG_ID
or
GETUSERSMS=EVENT:ERROR
Feedback message
description
GETUSERSMS=EVENT:TELNUM,MSG_ID –
information about text message and phone number
assinged to the event
GETUSERSMS=EVENT:ERROR – command rejected
by the system
List of events handled by the SETUSERSMS and GETUSERSMS commands
Alias name
Description
ARM1
Partition 1 armed
ARM2
Partition 2 armed
DISARM1
Partition 1 disarmed
DISARM2
Partition 2 disarmed
INPUT1
(to INPUT16)
Violation of zones 1…16
INPUT1-OFF
(to INPUT16-OFF)
Violation of zones 1…16 ended
INPUT1-TAMPER
(to INPUT16-TAMPER)
Sabotage of zones 1…16
