CPX200NW ALARM CONTROL UNIT – USER MANUAL
21 / 28
EN
Setting the name of partition
Command syntax
XXXX SETNAME=PARTITION,NR,VALUE
Command description
Setting the name of the partition.
XXXX – user code
NR – number of the partition, possibile values: 1 or 2
VALUE – new name of the partition
Example 1:
1234 SETNAME=PARTITION,1,Cellar
Example 2:
1234 SETNAME="PARTITION,2,Kids Room"
Feedback message
SETNAME::OK or SETNAME:ERROR
Feedback message
description
SETNAME::OK – command accepted
SETNAME:ERROR – command rejected by the system
Getting the name of partition
Command syntax
XXXX GETNAME=PARTITION,NR
Command description
Acquiring the name of the partition
XXXX – user code
NR – number of the partition, possibile values: 1 or 2
Example: 1234 GETNAME=PARTITION,1
Feedback message
GETNAME=PARTITION,NR,VALUE
or
GETNAME:ERROR
Feedback message
description
GETNAME=PARTITION,NR,VALUE – partition name
GETNAME:ERROR – command rejected by the system
