CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
54 / 106
8.1.2.2.
User ID
Most often it is not required while using public APN. For private APN, you should
obtain that parameter from the operator (without it no access to GPRS network can
be granted).
8.1.2.3.
User password
Most often it is not required while using public APN. For private APN, you should
obtain that parameter from the operator (without it no access to GPRS network can
be granted).
NOTE: Using private APN increases the system security.
8.1.2.4.
DNS1 and DNS2
It defines the address of primary and secondary DNS (Domain Name System). If
server address was entered as a domain name at least one DNS address must be
entered.
8.1.3.
Primary Server Parameters
8.1.3.1.
Server IP Address
It is the IP address of a monitoring system receiver (OSM.2007) or a computer on
which “Communication server” software is installed, e.g. 89.123.115.8. The address
can be given as a server’s domain name, e.g. modul.gprs.com. In such a case at least
one DNS server address is required.
8.1.3.2.
Server port
It defines a port which was dedicated in the server for the receipt of data from the
equipment.
8.1.3.3.
Interval between subsequent attempts of establishing connection
with a server.
The programmed equipment with SIM card inserted will automatically attempt to
establish connection with a server. Here you can define an interval (in seconds) after
which the equipment will retry to connect with a server, in case the previous attempt
was unsuccessful.
8.1.3.4.
Number of attempts of establishing connection with a server.
You can define how many times the equipment will try to connect with the server in
case of subsequent faults. After a defined number of attempts, the equipment will
initiate the procedure of connecting with secondary server. The option is active only
in case the secondary server parameters were defined.
