manualshive.com logo in svg

EBS Ink-Jet Systems 1500 Series, User Manual, Page: 69 / 111

Share
Download
EBS Ink-Jet Systems 1500 Series User Manual Download Page 69

EBS

Ink Jet Systems

 

 

EBS-1500

 Series Printers User's Manual

  Paragraph 4 - Operating the Printer

 

20060920#3.1

 

 

  67

 

The menu branches mentioned above can be protected with a user password. If 
the user forgets the password, the protection can be released by 

cancelling the 

user password. 

2)

 An operation time limit assigned to a user by the manufacturer (or distributor 

under a separate agreement). When the limit expires, the printer stops working 
automatically. Then the printer stops responding to user commands. Only the 
release protection command can be executed. The assigned time limit can be 
prolonged by 50, 100 or 200 hours, or possibly the limit can be cancelled and the 
unit released from any operational constraints. 

In the main MENU select the 

AUX. COMMANDS

 item and then the 

UNLOCK PROTECTION

 item. 

In order to get the protection released, contact the Manufacturer (distributor) by 
telephone and describe what kind of protection is to be released. 

After the 

UNLOCK PROTECTION

 command has been selected, a nine-digit code is 

displayed in the operating window on the terminal. The code is used to calculate the 
password. 

 

Reveal the code to the Manufacturer representative but do not exit the command or 
press any key (especially the printer switch-off key). You will be given a coded 
password to release the protection. Type the coded password and press the 

V

 

key. If you make a mistake or type in a wrong code, the device enables you to input 
the code ten times before you will have to contact the manufacturer or your 
distributor. After ten unsuccessful attempts the message 

Switch the PRINTER off and on

 is displayed and the protection remains enabled. 

 

If the proper code is typed in, the printer confirms this fact by displaying the 

**OK**

 

message and the user-indicated security feature is disabled. 

NOTE: 

If the user had to exit the command while waiting for a return code and has now 
repeated the command 

UNLOCK PROTECTION

, then the code obtained will be 

invalid and will not help release the protection. Only a return code entered properly 
soon after the original code, while the 

UNLOCK PROTECTION

 command is active, 

will allow the protection to be released. 

!

Summary of Contents for 1500 Series
















































































































Reviews:

No comments