6
EP100 Master Instruction
_____________________________________________________
D00002-C-04
3 DESIGN
1a
Adapter 1/2"-14NPT (see accessories)
1b
Cable gland PG 13.5
2
Plug, interchangeable by Pos. 1
3
Screw terminals 11+ 12- for input (w)
I
–
to measure input current (see also item 23 )
4
Ground connection
5
Female thread 1/4-18 NPT for output I (y1)
6
Female thread 1/4-18 NPT for air supply (s)
7
Female thread 1/4-18 NPT for output II (y2)
8
Direct connection hole for output I (y1)
9
Feedback shaft
10
Connection manifold for mounting to linear
actuators
11
Connection base for mounting to rotary actuators
12
Travel indicator
17
Air reducing throttle* for output I
18
Air reducing throttle* for output II
19
Shaft for limit switch connection
20
Cover with window to 12
21
Air vent, dust and water protected
22
Nameplate
23
Connections for current measurement, 2 mm dia.
(integrated in side of terminals)
26
Arrow points to flat of feedback shaft at angle 0°
27
Ball valve for protection class NEMA 4X
* Service only
