background image

 

19-8-2010                                                                          3                                                                          IR Link Pro 

 

User Guide

 

 

CONTENTS 
 
1. Conformity of Use 

2. Introduction 
3. Kit content 
4. How does the ebode IR Link Pro work? 
5. Installing the ebode IR Link Pro 
6. Operation 
7. How to avoid and solve possible problems 
8. Technical information 
 

1.

 

Conformity of Use 

For carefree and safe use of this product, please read this manual and safety information 
carefully and follow the instructions. The unit is registered as a device that does not cause or 
suffer from radio-frequency interference. It is CE approved and it conforms with the Low 
Voltage Directory. The safety and installation instructions must be observed. Technical 
manipulation of the product or any changes to the product are forbidden, due to security and 
approval issues. Please take care to set up the device correctly - consult your user guide. Young 
children should use the device only under adult supervision. No guarantee or liability will be 
accepted for any damage caused due to incorrect use of the equipment supplied, other than 
indicated in this owner’s manual. 
 
SAFETY WARNINGS 

 

To prevent short circuits, this product (except if specified for outdoor usage) should only be 
used inside and only in dry spaces. Do not expose the components to rain or humidity.  

 

Avoid strong mechanical tear and wear, extreme ambient temperatures, strong vibrations 
and atmospheric humidity. 

 

Do not disassemble any part of the product: no user-serviceable parts are inside. The 
product should only be repaired or serviced by qualified and authorized service personnel. 
Defected pieces must be replaced by original (spare) parts. 

 

Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste. 
Never use old and new batteries or different types of batteries together. Remove the 
batteries when you are not using the system for a longer period of time. When inserting 
batteries be sure the polarity is respected. Make sure that the batteries are not short 
circuited and are not disposed in fire (danger of explosion). 

 
In case of improper usage or if you have opened, altered and repaired the product yourself, all 
guarantees expire. The supplier does not accept responsibility in the case of improper usage of 
the product or when the product is used for purposes other than specified. The supplier does not 
accept responsibility for additional damage other than covered by the legal product 

responsibility. 
 
2. Introduction 
Congratulations on purchasing the ebode IR Link Pro.
 Our ebode proprietary eIR

2

x

TM 

(pronounce 

Irex) Technology guarantees a high level of immunity for InfraRed noise from direct sunlight, CFL 
lighting and Flat Panel TV’s (including Plasma, LCD and LED).  This kit contains one 3IREDB for 
control of 3 devices, and a 1IRQC Quick Connect cable for direct control of popular 
audio/video Receivers (e.g. Yamaha, Onkyo, Denon, Marantz, NAD, Harman Kardon etc). The 
IR Link Pro runs on a 12VDC mains adapter (included) and  is expandable with extra IR 
Link Receivers in different rooms. 
 

Summary of Contents for IR Link Pro









Reviews: