background image

 

19-8-2010                                                                          35                                                                          IR Link Pro 

DECLARATION OF CONFORMITY 

 
Hereby, ebode electronics, declares that this ebode IR Link Pro is in compliance with the 
essential requirements and other relevant provisions of the following Directives: 

 

Directive 2004/108/EC of the European Parliament and of the Council of 15 December 
2004 on the approximation of the laws of the Member States relating to 
electromagnetic compatibility 
 
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 
2006 on the harmonization of the laws of Member States relating to electrical 
equipment designed for use within certain voltage limits 
 
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 
on the restriction of the use of certain hazardous substances in electrical and electronic 
equipment 
 
Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 
establishing a framework for the setting of eco design requirements for energy-using  
  
Technical data and copies of the original Declaration of Conformity are available and 
can be obtained from ebode electronics: PB 25, NL-4264ZG, the Netherlands. 

 
 
 

 
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste 
Electric and Electronic Equipment (WEEE) 
 
This document contains important information for users with regards to the 
proper disposal and recycling of ebode products. Consumers are required 
to comply with this notice for all electronic products bearing the following 
symbol: 

 
Environmental Information for Customers in the European Union 
 
European Directive 2002/96/EC requires that the equipment bearing this symbol on the 
product and/or its packaging must not be disposed of with unsorted municipal waste. 

The symbol indicates that this product should be disposed of separately from regular 
household waste streams.  
 
It is your responsibility to dispose of this and other electric and electronic equipment via 
designated collection facilities appointed by the government or local authorities. 
Correct disposal and recycling will help prevent potential negative consequences to 
the environment and human health.  
 
For more detailed information about the disposal of your old equipment, please 
contact your local authorities, waste disposal service, or the shop where you purchased 
the product. 

 

Summary of Contents for IR Link Pro









Reviews: