31-7-2014 59 ebode IPV38P2P
Figure 6.57
③
Press the left mouse and drag it on the time boxes, you can select the serial area.
Figure 6.58
Step 7) Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the
camera will alarm and adopt the corresponding alarm indicators.
NOTE:
You must set the detection area and detection schedule, or else there is no alarm
anywhere and anytime.
6.6 Record
This section will allow you to change the record files storage path and the record time.
6.6.1 Storage Location
On this page you can change the alarm and manually recording storage path.
Figure 6.59
