March 2013 IPV38 / IPV38WE
14
1.7.3 Network Configuration
Below shows how you can configure the Network parameters.
Figure 2.2
Obtain IP from DHCP server:
If clicked, the device will obtain IP from DHCP server. In other words, the
camera will have a dynamic IP. (Make sure the Router which the camera connects to has DHCP function
and DHCP is enabled, by factory default all routers have DHCP enabled).
(Figure 2.2).
Figure 2.3
IP address:
Fill in the IP address assigned and make sure it is in the same subnet as the
Gateway
, and
the subnet should be the same as your computer or router. (I.e. the first three sections are the same).
Subnet Mask:
The default subnet mask of the equipment is: 255.255.255.0.
Gateway:
Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your
router.
DNS Server:
IP address of IPS network provider. We suggest you use the same IP address as the
Gateway.
NOTE
: You can find the
Subnet Mask
,
Gateway
,
DNS Server
from your router, or check the local
connection status of your computer, to get all the parameters. Normally two DNS servers are optional.
Please go to step 3.7.3 (CMD)
if you do not know how to find this information.