3.
3.
Mainboard side Components Replacement
1. Open the two ejectors on the slot by pushing them, and remove the RAM
from the slot.
2. Align and insert the new RAM into the slot and push both ends of the
RAM down until the ejectors snap into place.
3. Disconnect the SATA cable the HDD power cable from the main board.
4. Disconnect the speaker cable from the main board, and un-tighten the
four screws and then remove the speaker assembly.
Chapter 3
5
Summary of Contents for X-POS 850
Page 1: ...Service Manual X POS 850...