Operating and Maintenance Instructions
210-OMI13277_Iss1.doc
ORIGINAL INSTRUCTIONS
Page 13 of 15
© ebm-papst UK Ltd, 2012
Chelmsford Business Park Chelmsford Essex CM2 5EZ
Telephone: +44(0)1245468555 Fax: +44(0)1245466336
e-mail
CN1090
Terminal Block Use
The terminal blocks fitted are operated as follows:
Insert a 2.5mm or 3mm flat blade screwdriver
fully
into the upper hole as shown, to open the terminal wire entry.
Insert the wire into the lower hole then remove the screwdriver to leave the wire clamped in the terminal.
Alternatively
, open the wire entry by inserting the screwdriver
fully
from the opposite side of the connector as
shown
Insert the wire into the lower hole then remove the screwdriver to leave the wire clamped in the terminal.
Check wire clamp has moved clear to
allow wire entry
