Installation instructions
ArgoDrive wheel change
AD-80.7
AD-100.12
AD-145.25
Article-Nr 14832 • 1.0 • en-us • Change • Release November 9, 2022 • page 7/11
ebm-papst St. Georgen GmbH & Co. KG • Hermann-Papst-Straße 1 • D-78112 St. Georgen
T49 (0) 7724 81-0 • Fax +49 (0) 7724 81-1309 • [email protected] • www.ebmpapst.com
5.1.4 Changing the impeller (AD-100.12)
1. Open the six M6x45 screws with a WAF5 Allen key.
2. Screw the two M2.5x12 screws supplied into the marked
holes with an Allen wrench WAF2 until the latches can no
longer come into contact with the slip hub’s cams. The
impeller must be able to rotate freely by 360°.
3. Remove the slip hub.
4. Remove the impeller.
5. Check the bearing surface of the impeller for soiling and
clean if necessary.
6. Fit the new impeller.
7. Fit the slip hub.
