Installation instructions
ArgoDrive wheel change
AD-80.7
AD-100.12
AD-145.25
Article-Nr 14832 • 1.0 • en-us • Change • Release November 9, 2022 • page 8/11
ebm-papst St. Georgen GmbH & Co. KG • Hermann-Papst-Straße 1 • D-78112 St. Georgen
T49 (0) 7724 81-0 • Fax +49 (0) 7724 81-1309 • [email protected] • www.ebmpapst.com
8. Remove the two M2.5x12 screws with an Allen wrench
WAF2 and check whether the two latches fall onto the slip
hub again.
Danger
Ensure brake function
If the two M2.5x12 screws have not been removed
and the two latches could not fall properly onto the slip
hub again, the brake is inoperative!
A brake test (see operating instructions) must
be performed before restarting.
9. Tighten the six M6x45 cylinder head screws supplied to
16.5 Nm ± 1 Nm crosswise with a WAF5 hexagon socket.
