30
31
VIGO V52HD
•
After machine turns on, press this key, the louver will swing continuously left and right; by
pressing this button againthe movement will stop and the louver remain in that position.
9. SLEEP MODE
•
While in cooling mode, press the SLEEP key to set the temperature. It increases1°C after
an hour and at most increases 2°C after 2 hours.
•
While in heating mode, press the SLEEP key to set the temperature. It decreases 1°C after
an hour and at most decreases 2°C after 2 hours.
•
Press the SLEEP key again can cancel the setting.
10. DRAINAGE
A) Continuous drainage
When operating in dehumidification mode, it is possible to connect a continuous drainage
condensate by uncorking the upper drain and connecting a drain pipe. See fig A
B) Emptying the condensation tank
The device is equipped with an alarm function informing about filling the internal condensate
tank. When the tank is full, the machine will sound an alarm and the FULL indicator on the
control panel will light up. In this situation, empty the water tank by unplugging the bottom
water drain (B). Remember to put the device in a place where the water can drain into the
sewage system. You can also drain water by connecting a drain hose.
Internal Tank Water Full Alarm Function
The inner water tank in the air-conditioner has one water level safety switches, it controls water
level. When water level reaches an anticipated height, the water full indicator lamp lights up.
(If water pump is damaged, when the water is full, please remove the rubber blockage at the
bottom of unit, and all water will drain outside.)
CONTINUOUS DRAINGE
• When you plan to leave this unit unused for a long time, please remove the rubber blockage
from the drainage hole at the bottom of unit, and connect a drain hose to the lower fixing clip.
All the water in the water tank will drain outside.
