30
31
Filter/Dust Sensor/Anion Producer Cleaning and Maintenance
GB
1.
Pre-filter (approximately twice per month)
2.
Cellular -Activated Carbon, cold catalyst filter (approximately once every two months)
3.
Antibacterial cotton, HEPA filter (approximately once every two months)
4.
Cleaning of air outlet
• Clean the surface of the filter with a vacuum cleaner or wash with
water. Allow to dry thoroughly.
• Clean the dust from the front of the filter with a vacuum cleaner.
• Place the filter in a ventilated area, this will allow harmful gasses and
germs to dissipate. Do not place under too much sun exposure.
• The filter is delicate. Do not press too hard on the filter while vacuuming.
• Do not use water to clean this filter.
• Place the filter in a ventilated area, this will allow harmful gasses and
germs to dissipate. Do not place under too much sun exposure.
• Do not use water to clean this filter.
• Switch off the power and pull out the plug from
socket.
• Put the hand on air grid and pull up to remove.
• Take out the air grid during running, the machine will
stop automatically, put back the air outlet grid and
continue performing the function before power off.
Filter/Dust Sensor/Anion Producer Cleaning and Maintenance
GB
5.
Anion producer cleaning and maintenance.
6.
Particulate sensor (approximately once every two months).
• When you hear the machine produce a creaking sound, use a
#1 or #2 paintbrush as a cleaning tool. Insert the brush from the
ventilation window above the anion emission head. Regularly
clean the dust all around the emission head.
Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or tobacco smoke residue
may cause it to no longer work properly). First remove the particulate sensor cover, use a dry cotton swab
to wipe the lens.
• Do not insert the cotton swab into any area other than the lens.
• Be sure to unplug the power cord.
• If you are unable to see clearly, please use a light.
Friendly Reminders:
• Before cleaning and maintenance, unplug the power cord.
• Do not operate the machine in absence of a filter. It will not be able to remove the dust. Dust taken
into the machine may cause malfunction.
• When not using the machine for a long period of time, please unplug it. Power is also consumed while
in standby mode.
• You may need to replace filters sooner depending on where and how you use the appliance (such as
a household with a large smoking population or areas with higher air pollution). Replace the filter if
filtration is not noticeable.
Cotton Swab
Cotton Swab
