EBARA 4WN 2-10 Original Instruction Manual Download Page 11

11

1. Introduction

First  of  all,  we  would  like  to  thank  you  for  choosing  a  4WN 
borehole pump set.
All of our products are manufactured with particular care and 
attention in order to ensure safe application, reliability and a long
service life.

4WN borehole pump sets are fundamentally ready for installa-
tion/operation  in  their  supplied  state.  The  supplied  product 
includes the following items:

4WN borehole pump

4

"

motor 2-wire (no switch box necessary)

20, 30 or 40 m underwater cable, depending on design 

(flat cable suitable for drinking water)

Safety plug

Operating instructions

Upon receipt of the delivery, please check the packaging imme-
diately for any possible shipping damage and report any damage
found to the delivery firm/shipping company. After removing the
pump from its packaging, make sure that it has not suffered any
damage during transportation. If any damage is found, please 
report this to the dealer where you purchased the product within
eight days of receipt of delivery. 

Check  the  electric  pump’s  rating  plate  to  ensure  that  its 
specifications comply with those of your order.

2. Safety instructions
2.1 In general 

Incorrect  installation  or  use  of  the  pump  can  lead  to 
serious to life-endangering physical injuries or considerable
damage  to  property.  For  this  reason,  the  information 
contained  in  this  instruction  manual  must  be  observed 
without fail at all times.

This instruction manual contains fundamental information which
is to be observed for the installation, operation and maintenance
of the product in order to ensure safe handling of the pump and
avoid injury and damage to people and property. 

In  your  own  interest,  please  ensure  that  you  comply  with  all 
instructions contained in this manual at all times.

This manual must be handed over to the installer together with
the pump. 

Both installer and respective specialist personnel / operator must
have read and understood this manual completely prior to the
pump being installed and commissioned. Always store the instruc-
tion manual in a safe place where it is easily accessible.

Work such as operation, transport, maintenance, inspection and
installation  may  only  be  carried  out  by  personnel  with  the 
appropriate qualifications. 

Any warranty/guarantee in respect of this product shall become
void in the event of failure to observe this instruction manual
and/or any interventions work (e.g. modifications, alterations etc.)
on the pump which is not carried out by one of our service stations
and releases us as manufacturer from any liability for personal
injury and/or damage to property, as well as any damage to the
pump itself.

2.2 Marking of safety instructions

Warning

Failure to observe these safety instructions can lead
to serious personal injuries.

Warning

Danger from hazardous electrical voltage. Failure to
observe  these  safety  instructions  can  result  in 
persons suffering an electric shock which could lead
to serious injuries or death.

Failure  to  observe  these  safety  instructions  can 

result in malfunctions or damage to property.

2.3 Residual risks

Because of the design of the pump, there is a risk of
coming into contact with the running unit through the

suction opening or the discharge side.

3. Storage and transport

Storage temperature: -10°C to +50°C
The  borehole  pump  set  must  not  be  subjected  to  any  direct 
sunlight. If taking the pump set out of its packaging, it must be
propped up adequately when storing in a horizontal position in
order to avoid the pump from sagging (see fig. 1).

Other than this, the pump is to be stored standing in an upright
position with the motor facing downwards.

4. Designated purpose
4.1 Intended use

The pump set offers a wide range of application possibilities for
pumping clean water or water with a sand content of less than
50 g/m³. This includes water supplies to private or industrial water
plants, pressure booster systems, fire extinguishing plants and
watering/irrigation systems.

4.2 Non-intended use

The pump set is not suitable for

pumping inflammable or dangerous liquids

pumping dirty/contaminated water containing solids and/or 

h

CAUTION

i

i

CAUTION

 

Fig. 1

Summary of Contents for 4WN 2-10




















































Reviews: