Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
37
Line Array
Application Guide
• Using M8 x 22 bolt w/flat and lock washers to secure front rigging, then M10 bolt w/ flat
washers and lock nut to secure rear rigging angle (See Resolution for angle).
• Repeat to use desired KF810P amount in array (See Resolution for array limitations).
Ground Stacking Procedures
WARNING:
Ground-stacked arrays, especially the maximum recommended arrays, requires
assembly by personnel qualified to ensure adequate stability from tip over for the particular
application. See Section 6 for correct array assembly. Mechanical assistance will be required to lift
and position enclosures for arrays taller than approximately 5 feet.
NOTE:
Low Frequency performance is often highly program or venue-dependent, as well as
subjective as to quantity and quality. For this reason, the type, quantity, and disposition of
subwoofers may vary considerably with the application. The quantity recommendations below are
for general purposes, providing a balanced system for most music applications. Quantities may need
to be adjusted up or down for specific situations.
