34
cause fire or explosion, and lower temperature may reduce the performance of the battery.
⚫
Do not disassemble the battery by any means or damage it with a sharp object.
⚫
Do not splash the acid or alkali liquid on the surface of the base station.
⚫
Avoid collision during transportation.
⚫
Check the base station status regularly, and contact the EAVISION distributors in time for damaged base
station or antenna.
⚫
Make sure the tripod is set stably.
Start Operation
Preparation
The drone is equipped with a built-in SIM card to ensure the normal operation. And an additional SIM card
can be prepared to install into the drone (only for cloud mode).
The system can switch between two operators, bringing better user experience and stable connection to the
drone. According to the local operator circumstance, users can install another SIM card to ensure more stable
connection to the drone.
Product
Item
Description
Drone
Camera lens
Make sure the camera lens is intact and clean.
Radars
Make sure the radars are intact and clean, and the
cable connection is normal.
Night lights
Make sure the night lights are clean and no water
inside.
Spray tank
Make sure the spray tank is intact, and the cable
connection is normal.
Remote
controller
Appearance
Make sure the
appearance is not cracked, chipped,
or misshapen, the remote controller is with full
battery level and can be powered on properly.
Cloud base station
Make sure the cloud base station service is valid
Surveying tool
Appearance
Make sure the
appearance is intact, and the
connector is not damaged.
Battery
Battery
Make sure the battery is with full battery level, and
the appearance is not cracked or swollen.
Charger
Charger
Make sure the
appearance is intact, and the
connector is not damaged.
Generator
Generator
Make sure the
appearance is intact, and the
connector is not damaged.
