12
Remote controller LEDs
The status LED indicates different meanings with three colors of light flashing and different flashing
frequencies.
Status LED
Description
Red light flashing quickly
Linking
Alternating red-green-yellow flashing slowly
Picture transmission starting up
Alternating red-green-red-green-red flashing
Unexpected shutdown of Android system
Red light flashing slowly
Firmware mismatch
Red light flashing three times
Image transmission initialization failed
Red light flashing four times
Joysticks need to be calibrated
Yellow light flashing slowly
The remote controller power supply voltage is abnormal
Yellow light flashing twice
Remote controller Bluetooth not connected
Solid red light
No transmission with the receiver
Alternating yellow-red flashing
Alternating yellow-red-red flashing
Alternating yellow-red-red-red flashing
Remote controller temperature first-level alarm
Remote controller temperature second-level alarm
Remote controller temperature third-level alarm
Alternating green-red flashing
Alternating green-red-red flashing
Alternating green-red-red-red flashing
Receiver temperature first-level alarm
Receiver temperature second-level alarm
Receiver temperature third-level alarm
Flashing green light
The faster the flashing frequency, the worse the signal
strength
Precautions for use
1. Do not use the remote controller to control the drone near crowds, obstacles, strong electromagnetic
source, or other areas that are likely to cause unnecessary economic losses or even personal injury.
2. When operating, do not cover the remote controller antenna or block signal transmission in other ways.
3. During operation, keep a visual line of sight between the mid-section of the remote controller antenna
and the drone, and the shade of green plants will seriously affect the remote controller signal distance.
4. The top of the remote controller antenna is the part with the weakest signal transmission. When operating,
avoid pointing it to your drone.
5. Do not cut off the power of the remote controller when the drone motor is still running.
6. Always check the battery level of the remote controller before operation.
