21
Charger use
Checklist before use
⚫
Appearance check
1. Make sure that the charging controller and power input cables are not broken.
2. Make sure that the charging controller pins are not misshapen.
3. Make sure that the generator supply cable and socket are not cracked, chipped, misshapen, or blocked.
⚫
Power-on check
1.
Make sure that the fan runs normally after connecting to the power supply.
2.
Check whether the fault LED of the charging controller is off which indicates that the charger self-
check is normal.
3.
Turn on the Bluetooth of the mobile phone, open the charging management app, find the
corresponding charger ID and connect it, and check the status of the charger.
Use
1.
The charger must be well grounded when in use. Please use a grounding wire to ground the shell of the
charger. Remove the screw of the grounding interface and fix the grounding wire, as shown in the figure
below.
