31
b)
Operations: enter Operate view, tap Setting to check the RTK connection status of the drone. Start
operation after the drone is ready to receive tasks without warning prompts.
c)
Make sure there’s no obstruction between the remote controller and the base station, and nothing
obstructs between the remote controller and the drone during the operation. Otherwise, the signal at
any end may be blocked which may lead to the loss of the RTK positioning signal.
d)
Make sure the location of the base station in operation is the same with that of the base station in plot
surveying, and the error shall be less than 0.5m, or the operation accuracy will be decreased.
(6)
Firmware upgrade
a)
Connect the base station with the remote controller through Type-C data cable.