16
Operating instructions
1. The Smart AG App
Smart AG is an important software for controlling the aircraft. Its main functions include task
sending, route planning, spraying parameter settings, operation mode settings, flight parameter
settings, forwarding differential signals, and aircraft data interaction, etc. .
1)
Download the App
The App works with Android systems.
Scan the QR code below to download the App.
Please check the version before using the App and update it if prompted.
2. The operation steps of Smart AG App are as follows:
a) Open Smart AG and login with your personal account.
b) Select the aircraft to be paired.
c) Press “pair” to link the drone.
d) When the drone is connected, select the base station mode
3. Connect the base station to either a mobile base station to perform operations.
1) Mobile base station connection (global offline model)
a. Select an open area, away from trees, obstacles, utility poles, high-voltage lines,
crowds, etc., and keep the tripod held at a vertical level
b. Make sure there are no obstacles near the inverted cone directly above the base station
antenna
c. Double check that the base of the tripod is secured into the ground and kept there
by solid and stable soil.
d. Affix the base station body on the tripod with screws
e. Turn on the power button, wait for 5 minutes, the blue indicator should flash, and
the base station should be fully functional.
Note:The signal coverage of the base station is 10km. Do not move the base station in any
way during flight operations
.