13
Linking
1.
Enter "System Settings" in "SIYI TX" APP, find “Frequency” and click "Start".
2. The status indicator of the remote control will flash red quickly, and it will display “Linking”
on the screen.
3. Press and hold the link button of the receiver for 2 seconds, the receiver status indicator will
flash red quickly.
4. Wait for 5~10 seconds. When the linking is successful, the status indicators of the remote control
and the receiver will turn green.
Operation control
Manual/Auto Mode Switch
Move the 3-gear switch in the upper left corner of the remote control to the upper gear for
automatic flight, and to the lower gear for manual flight.
Forced Spraying
The three-gear switch below the power switch of the remote control is a forced spraying switch.
Turn it to the left gear to turn off spraying, and turn it to the right gear to turn on spraying.
FPV
Open "SIYI FPV" on the remote control to display the image transmission screen.
