17
XSTORAGE HOME USER INTERFACE MANUAL
July 2019 www.eaton.com
8. How to update the user interface on units
running with the previous user interface
End-users using previous versions of the user interface can also easily upgrade to the new version using the following steps:
•
Navigate to the local UI of the communication card https:/ /<unit_IP> on your browser. The Failover IP Address is
192.168.2.254.
•
Login with your credentials.
•
On the left menu select “Firmware updates”.
•
Update it using the file XSTH1PNP_V66677748.hex. This task will take about 5 minutes as shown in Figure 18.
Figure 18: *.hex file moves to the new user interface
•
Navigate and log-in again into the local UI of the communication card.
•
On the left menu select again “Firmware updates”
•
This time use the latest inverter bootloader XSTH1P_BL_v002.ROM file or superior version.
•
Navigate and log-in again into the local UI of the communication card.
•
On the left menu select again “Firmware updates”.
•
This time use the latest *.hex file XSTH1PNP_YYYYMMDD.hex as shown in Figure 19.
•
Onboard the unit following the steps already described in the previous sections of this xStorage Home User Interface manual.
Figure 19: Firmware update to use the new UI
For any questions or issues please contact our customer care hotline or email
.
