Eaton XN-GWBR Series, User Manual

Page: 81 / 206

5 Implementation of EtherNet/IP
5.3 VSC-Vendor Specific Classes
XI/ON: XNE-GWBR-2ETH-IP 09/2011 MN05002007Z-EN www.eaton.com
81
105
(69h) Module param bit
count G UINT States the number of parameter bits of the
module.
106
(6Ah) Module diag bit
count G UINT States the number of input bits (produced
bits) of the module.
107
(6Bh) Module output bit
count G UINT States the number of output bits
(consumed bits) of the module.
108
(6Ch) Module
SUBMODE G USINT Contains the Submode ID of the XI/ON
module.
109
(6Dh Module group
count G USINT States the number of internal groups of the
module.
110
(6Eh) Diag G ARRAY OF
BYTE Contains the diagnostic information of the
module.
111
(6Fh) Param G/S ARRAY OF
BYTE Contains the parameters of the module.
112
(70h) Input G ARRAY OF
BYTE Contains the input data (produced data) of
the module.
113
(71h) Output G/S ARRAY OF
BYTE Contains the output data (consumed data)
of the module.
114
(72h) Referenced
VSC G USINT The VSC that represents this XI/ON module.
If this module is contained in the internal
gateway library, then it is listed in a specific
VSC that describes the typical attributes of
the module.
115
(73h) Referenced VSC
instance G USINT The VSC Instance that represents this
XI/ON module. If this module is contained in
the internal gateway library, then it is listed
in a specific VSC that describes the typical
attributes of the module.
116
(74h) Module regis-
tered index G/S ENUM
USINT Contains the index numbers specified in all
the module lists.
Table 41:
Object
Instances Attr.
no.
dec.
(hex.)
Attribute name G et/
S et
Type Description