xComfort Room Controller Touch – Effect Regulation - User manual 2v00_EN
4 |
P a g e
To unlock the display, again press the top area for approximately 5 seconds until ‘ULoc’ (flashing)
appears on the display.
When locked, the Room Controller Touch will ignore any touch activity on the display; if touched, it will
display ‘Loc.’ (flashing) for a short period, after which it will return to the idle state.
2.3 Cleaning mode
To prevent any unwanted changes during the cleaning of the Room Controller Touch, the display can be
put into cleaning mode.
The Room Controller Touch must only be cleaned with glass cleaner or window cleaner,
and never with abrasive products.
In cleaning mode, the Room Controller Touch will ignore any touching activity on the display. The display
will then show the remaining time in seconds until the Room Controller Touch switches back to normal
operation.
>7 Sec.
>5 Sec.
>5 Sec.