xComfort Room Controller Touch – Effect Regulation - User manual 2v00_EN
16 |
P a g e
Change
Use the arrow keys to
change
Once changed, the changed value will
start flashing
Leave edit mode
Timeout or
3.4.4 (Optional) Edit/set the monthly clock correction factor
If the internal clock of the Room Controller Touch is inaccurate, it is possible to configure the number of
seconds by which the clock needs to be corrected each month (-99 to +99 seconds).
Note:
The accuracy of each clock may vary slightly, which may cause it to go out of sync with the
current time. This will then cause the week program to switch to the desired setpoint
temperature either too early or too late.
Select the clock
Enter edit
Press edit > 5 Sec
Change
Leave edit
