4
Eaton RF System Basic Mode Quick Reference
Symbols:
Sensors:
Actuators:
Link Device
Unlink Device (selectively)
Reset actuator (all settings & connections)
Manual Operation
LED is on
LED flashes 5 times
LED is on
Lamp (LED) is on
Lamp (LED) is on
1. Link devices
Assign a pushbutton to an actuator
1. Press the configuration pushbutton with a screwdriver
for less than 0.5 sec => actuator enters teach-in mode
the LED in the actuator is on
2. Press the selected pushbutton for less than 0.5 sec
3. LED in the actuator flashes twice for confirmation
4. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => actuator leaves teach-in mode
Assign a remote control to an actuator
1. Press the configuration pushbutton with a screwdriver
for less than 0.5 sec => actuator enters teach-in mode,
the LED in the actuator is on
2. Press the selected remote push button for less than 0.5 sec
3. The LED in the actuator flashes twice for confirmation
4. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => actuator leaves teach-in mode
Assign a room thermostat to an actuator
1. Press the configuration pushbutton with a
screwdriver for less than 0.5 sec => actuator
enters teach-in mode, the LED in the actuator is on
2. Turn the control knob to +
3. The LED in the actuator flashes twice for confirmation
4. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => actuator leaves teach-in mode
Assign a channel of the binary input in
switch mode
1. Press the configuration button on the binary
input (the mains supplied version requires a screwdriver) for selecting the mode, switch mode is Mode 2, LED
flashes 2x for Mode 2
2. Open contact of the binary input
3. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => actuator enters teach-in mode, the
LED in the actuator is on
4. Close contact of the binary input
5. The LED in the actuator flashes twice for confirmation
6. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => actuator leaves teach-in mode
