3
4
1
2
3
6
5
7
3V-CR2450N
ca. 60-90%
ca. 80-95%
ca. 20-60%
ca. 0-10%
ca. 70-90%
P9400 Surface / Flush mounting frame
Flush mounting frame e.g. P902
Prise off „Clip on“
Cover
Insert screwdriver to release
module from surface plate
Mounting
screws
Screw caps
if fitted
Remover screw cap discs, if fitted,
along with mounting screws to
release flush plate from wall box
and allow access to battery at rear
of module
Note: If Push button modules are either mounted on metal back boxes or used with metal clip on plates then the RF range may be restricted.
