Eaton US-S ESF30 13-P, Mounting And Operating Instructions

Page: 5 / 20

5
Mounting and Operating Instructions Fire-Resistant Cabinet Type US-S ESF30 40071860245 (B) February 2020 www.ceag.de
2 Safety
been trained in possible hazards that may occur. A qualified
person is anyone who, based on his/her training, expertise
and experience as well as his/her knowledge of the relevant
provisions, is able to assess the work that he/she has been
given and to identify any potential hazards.
2.6 Work safety
Following the safety information and instructions provided in
this operating manual is essential to avoid bodily injuries and
property damage while working on and with the equipment.
instructions before commencing work on the equipment.
This also applies if the person concerned has worked with
the same or similar equipment in the past or was trained by
the manufacturer.
2.3 Changes and alterations to the equip-
ment
In order to avoid hazards and to ensure the best possible
performance, no modifications, retrofits and add-ons are
permitted on the equipment unless these were expressly
approved by the manufacturer.
2.4 Responsibility of the operating entity
These operating instructions must be kept in the direct
vicinity of the equipment and must always be accessible to
people working on or with the equipment. The equipment
must only be operated if it is in an exemplary and operationally
safe condition. The equipment must be checked every time
before it is put into operation. The operating instructions as
set out in the manual must be complied with in full!
2.5 Personnel requirements
Only authorised and qualified personnel may carry out
work on or with the device. These personnel must have
Tabelle 1: Technical Data
Type
US-S ESF30
28-P
US-S ESF30
13-P
US-S ESF30
SOU5
US-S ESF30
SOU3
US-S ESF30
SOU2
US-S ESF30
SOU1
Approvals / Certificates DIBT DIBT VDE VDE VDE VDE
Fire exposure from out-
side (min)
30 30 30 30 30 30
Enclosure specifications
Enclosure Fibre plates Fibre plates External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
Protection rating IP42 IP42 IP65 IP65 IP65 IP65
Protection class l l l l l I
Dimensions
(W x H x D in mm)
2064 x 914 x 604 1198 x 898 x 449 1140 x 400 x 230 840 x 400 x 230 690 x 400 x 230 535 x 396 x 230
Weight (kg) empty cabinet 330
187 81 61 51 35
Closure Sash fastener Sash fastener Sash fastener Sash fastener Sash fastener Sash fastener
Electronic specifications
Rated voltage 400 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz
Number of module slots 30 13 5 3 2 1
Max. conductor size /
final circuits (mm²)
4 4 4 4 4 4
Max. conductor size (mm²) 35 35 10 10 10 10
Max. total conductor
size (mm²)
775 625 89 79 74 39
3 Technical Data