S811+ Soft Starter
x
S811+ Soft Starter
MN03900001E—November 2012
CAUTION
If the AUTO Reset mode setting is used, CAUTION must be
exercised to assure that any restart occurs in the safe
manner.
CAUTION
If the AUTO Reset mode setting is used with level sensing,
CAUTION must be exercised to assure that any restart
occurs in a safe manner. Motor restart may occur
immediately and unexpectedly after any fault condition has
cleared.
CAUTION
In the AUTO Reset mode, CAUTION must be exercised to
assure that any restart occurs in a safe manner.
WARNING
Make sure you read and understand the procedures in
this manual before you attempt to set up or operate the
equipment.
WARNING
Do not work on energized equipment unless absolutely
required. If the troubleshooting procedure requires
equipment to be energized, all work must be performed
by properly qualified personnel, following appropriate
safety practices and precautionary measures.
WARNING
Setting the Overload Trip Class parameter to OFF
disables this feature resulting in no thermal overload
protection for the motor.
WARNING
Certain protection parameters may be set for TRIP Faults,
WARNING Faults, or DISABLE (No TRIP or WARNING
indication). Parameters set to WARNING Fault, or
DISABLE will not result in a TRIP Fault and system
damage may occur. Disabling protection parameters is
not recommended.