Eaton PowerXL DX-NET-DEVICENET, Manual

Page: 34 / 62

4 Commissioning
4.6 Supported objects
30
DX-NET-DEVICENET 02/14 MN04012005ZEN www.eaton.com
4.6.1 Identity Object (01
hex
)
The Identity Object (Class Code 01
hex
) contains all the data required in order
to uniquely identify a network node.
The Identity Object supports the following services:
Table 6: Services
Attribute
Id Name Access Data type Description or Value
1 Vendor ID ro UINT Vendor identification number = 248
dec
The ODVA specifies the Vendor ID. This is
248
dec
for Eaton GmbH.
2 Device type ro UINT Device type (product type) = Communications
adapter
3 Product Code ro UINT 69123
dec
Eaton GmbH has defined the following product
code (used to identify specific vendor products)
for the module: 69123
dec
. It makes reference to
the model number.
4 Revision ro USINT Device version
Two bytes are returned when the device
version is read.
Major Revision ro USINT The low byte defines the hardware version, the
high byte the operating system version.
Minor Revision ro USINT
5 status ro WORD The device‘s status
6 Serial Number ro UDINT Device serial number
7 Product Name ro SHORT_
STRING DX-NET-DEVICENET
Service
code Service name Description
05
hex
Reset Calls the module's reset function.
OE
hex
Get_Attribute_Single This service can be used to read the value of a selected attribute from
the module.
10
hex
Set_Attribute_Single This service can be used to set a selected attribute in the module.