Eaton PowerXL DX-NET-DEVICENET, Manual

Page: 7 / 62

0 About this manual
0.1 Target group
DX-NET-DEVICENET 02/14 MN04012005ZEN www.eaton.com
3
0 About this manual
0.1 Target group
This manual describes the DeviceNet connection DX-NET-DEVICENET for
the variable frequency drives of the DA1 device series.
It is aimed at experienced drive specialists and automation technicians.
A thorough knowledge of theDeviceNet field bus system and the
programming of a DeviceNet master is required. Knowledge of handling the
DA1 variable frequency drive is also required.
Please read this manual carefully before installing and operating the
DeviceNet connection.
We assume that you have a good knowledge of engineering fundamentals,
and that you are familiar with handling electrical systems and machines, as
well as with reading technical drawings.
￫
DeviceNet is an open field bus standard that is based on the
CAN protocol and is specified in European standard EN 50325.
The specification for the DeviceNet standard is managed and
maintained by ODVA (Open DeviceNet Vendors Association).
￫
To make it easier to understand some of the images included in
this manual, the housing and other safety-relevant parts have
been left out.
The components described here must be used only with a
properly fitted housing and all necessary safety-relevant parts.
￫
Please follow the notes in the IL040004ZU instruction leaflet.
￫
All the specifications in this manual refer to the hardware and
software versions documented in it.
￫
More information on the series described here can be found on
the Internet under:
www.eaton.eu/powerxl
￫
For more information on DeviceNet, please visit ODVA‘s
website at:
www.odva.org