![background image](http://html1.mh-extra.com/html/eaton/powerware-environmental-rack-monitor/powerware-environmental-rack-monitor_user-manual_3872605026.webp)
CONFIGURATION
EATON
Powerware
®
Environmental Rack Monitor (ERM) User’s Guide
S
164201673 Rev 1
21
+============================================================================+
|
IP Address
Community String
Severity
Description
|
+============================================================================+
[1] 192.168.65.235
*
Informational
[2] 192.168.61.168
*
Informational
[3] 0.0.0.0
*
Informational
[4] 0.0.0.0
*
Informational
[5] 0.0.0.0
*
Informational
[6] 0.0.0.0
*
Informational
[7] 0.0.0.0
*
Informational
[8] 0.0.0.0
*
Informational
1. Modify - Modify an entry of table
2. Reset - Reset an entry to default from table
0. Return to previous menu
Please Enter Your Choice => _
Figure 18. Trap Receiver Table
Complete ERM Configuration
After configuration is complete, press “0” to exit the console
connection. It is not necessary to reboot the ERM.
If you wish to reboot the ERM, type
6
to exit the console connection and
restart the ERM.
NOTE
If you want the ERM to load the factory configuration default, type
5
to Reset
Configuration To Default. After completing all the settings, type
0
to terminate the connection
without starting the ERM again or type
6
to terminate the connection forcing the ERM
internal program to start again. At this point, the initial ERM configuration is complete.
NOTE
If you want to restore the default ERM configuration data set in the factory, type
5
.