CONFIGURATION
EATON
Powerware
®
Environmental Rack Monitor (ERM) User’s Guide
S
164201673 Rev 1
18
Set the TH-Module Configuration
To change the status and name of the TH-Module-1 and TH-Module-2:
1.
Type
2
on the Main Menu to display the TH-Module Configuration
Menu screen (see Figure 14).
+============================================================================+
|
[ Rack Monitor Configuration Utility Main Menu ]
|
+============================================================================+
1. Rack Monitor Configuration
2. TH-Module Configuration
3. Access Control Table
4. Trap Receiver Table
5. Reset Configuration To Default
6. Restart Rack Monitor
0. Exit
Please Enter Your Choice => 2
+============================================================================+
|
[ TH-Module Configuration Menu ]
|
+============================================================================+
1. TH-Module-1 Setup
2. TH-Module-2 Setup
0. Return to previous menu
Please Enter Your Choice => _
Figure 14. TH-Module Configuration Menu
2.
Type
1
or
2
on the TH-Module Configuration Menu screen to select
the TH-Module-1 or TH-Module-2 Setup screens, respectively. See
Figure 15 and Figure 16.
+============================================================================+
|
[ TH-Module-1 Setup ]
|
+============================================================================+
1. TH-Module-1 Status : Auto
2. TH-Module-1 Name
: Lab Door Sensor
0. Return to previous menu
Please Enter Your Choice => _
Figure 15. TH-Module-1 Setup Screen
