CONFIGURATION
EATON
Powerware
®
Environmental Rack Monitor (ERM) User’s Guide
S
164201673 Rev 1
15
Modify the Parameter Group Parameters
To modify the SNMP identification information and the speed of reading
data from the ERM:
1.
Type
3
on the Rack Monitor Configuration Menu screen to display
the Parameter Group Configuration Menu screen (see Figure 12 and
Table 4).
2.
Type
0
to return to the Rack Monitor Configuration Menu screen.
+============================================================================+
|
[ Rack Monitor Configuration Menu ]
|
+============================================================================+
1. System Group
2. Control Group
3. Parameter Group
4. Email Group
0. Return to previous menu
Please Enter Your Choice => 3
+============================================================================+
|
[ Parameter Group Configuration Menu ]
|
+============================================================================+
1. sysContact
: Technical Support
2. sysName
: Rack Monitor
3. System Location :
4. Poll Rate
: 5
0. Return to previous menu
Please Enter Your Choice => 0
Figure 12. Parameter Group Configuration Menu
Table 4. Parameter Group Parameters
Number
Function
Description
Example/Remark
1
sysContact
Alphanumeric string
Technical
Support Team
2
sysName
Alphanumeric string
Rack Monitor
3
System Location
Alphanumeric string
Technical
Support Lab
4
Poll Rate
The time interval in seconds the ERM update
measurement (Temperatures and Humidity) from
sensor, valid value is between 3 to 60.
