Eaton 9390 UPS, 9395 UPS, and 9395 SSBM Sync Control Installation and Operation Manual
S
P-164000052 Rev 2
www.eaton.com/powerquality
2-1
Chapter 2
Installation Plan and Unpacking
The Eaton Sync Control is shipped as a separate item and can be mounted on any
surface that can safely bear its weight. See paragraph 2.2 for weight, dimensions, and
wiring preparation.
2.1
Creating an Installation Plan
Before installing the UPS system, read and understand how this manual applies to the
system being installed. Use the procedures and illustrations in the following chapters
to create a logical plan for installing the system.
NOTE
Startup and operational checks must be performed by an authorized Eaton Customer Service
Engineer, or the warranty terms as specified on page 5-1 become void. This service is offered as part of the
sales contract for the UPS. Contact service in advance (usually a two-week notice is required) to reserve a
preferred startup date.
2.2
Preparing the Site
For the Eaton Sync Control to operate at peak efficiency, the installation site should
meet the environmental parameters outlined in the applicable Eaton 9390 or Eaton
9395 UPS or SSBM installation and operation manual listed in paragraph 1.3.
2.2.1
Environmental and Installation Considerations
The life of the Eaton Sync Control is adversely affected if the system is not installed in
a temperature and humidity controlled indoor area free of conductive contaminants.
Failure to follow guidelines may void your warranty.
The UPS equipment operating environment must meet the weight requirements
shown in Table 2‐1 and the size requirements shown in Figure 2‐1 and Figure 2‐2.
Dimensions are in millimeters (inches).
Table 2‐1. Equipment Weight
Model
Weight
kg (lb)
Shipping
Installed
Eaton Sync Control
45.4 (100)
36.3 (80)
Figure
