![background image](http://html1.mh-extra.com/html/eaton/power-xpert-meter-4000/power-xpert-meter-4000_quick-start-manual_3877570017.webp)
www.eaton.com
IB02601007E
Page 17
2 Quick Start Guide for the Meter Module
6. Click Edit to make changes to these parameters.
7. Set the clock by clicking on Meter Setup & Commissioning > Clock > Edit.
Notes on Modbus support:
The Optional Communications Expansion (CE) card also provides communication via
Modbus RTU (CE3 & CE4 – see manual for Modbus instructions) The RS485 CE3 port
supports Modbus RTU slave to a master monitoring system. The port defaults as a Master
Gateway, which relays Ethernet Modbus TCP command to slave meters connected to the
same RS485 link. The Modbus slave address may be set via the display module or with a
web browser.