![background image](http://html1.mh-extra.com/html/eaton/power-xpert-meter-4000/power-xpert-meter-4000_quick-start-manual_3877570012.webp)
Page 12
IB02601007E
www.eaton.com
2 Quick Start Guide for the Meter Module
DO NOT HIPOT / DIELECTRIC TEST
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
CW
Power
Com 0
3
S
H
1
2
3
4
S
H
C
O
M
2
4
+
DG2-
1
2
D
B
D
A
DG1-
Display Link
24VDC Input
Customer Satisfaction for Technical Support
www.EatonElectrical or <http://www.EatonElectrical.com
1-800-809-2772 or 1-414-449-7100
E185559
MEASURING EQUIPMENT
20NL
Catalog#: PXD-MMG
Serial#: XXXXXX
Style#: 66D2117G01
Power Supply: 24 VDC (+/-20%)
SELV, 8W MAX.
MADE IN USA
Date Code: WYYYYMMDD
Rev: XXX
Oper Temp: -20 TO 60°C
MAC Address (Front): XX:XX:XX:XX:XX:XX
MAC Address (Bottom): XX:XX:XX:XX:XX:XX
DG1
Display Link
COM 0
DG2
C.
Set the Rotary Switch (
Figure 5
) located on the side of the Meter Module unit to a
number 1 through 16.
NOTE:
The Display Module can communicate to a maximum of 16 Meter Modules by con-
necting the Meter Module’s COM 0 together following basic RS485 wiring specifications.
Each Meter Module will need to be uniquely addressed using the Rotary Switch.
Figure 4:
Display Module Connections to Base Unit
Figure 5:
Meter Module Connections to Display
Rotary Switch
CM5-COM 0
CM6 24V
Source