With Visor Only
VISOR INSTALLATION INSTRUCTIONS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align visor with four (4) screw holes at the top of the fixture shown in
Figure 8.
4.
Install screws provided with visor, taking care to not scratch the finish of the
floodlight. Torque to 19 in.-lbs. (2.2 N-m).
5.
Install floodlight per above instructions.
•
Visor catalog number: DSV2.
NOTE:
Visor can be installed before or after floodlight has been in operation.
GUARD INSTALLATION INSTRUCTIONS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align guard with four (4) screw holes on each side of the fixture shown
in the image above.
4.
Install screws provided with guard, taking care to not scratch the finish of the
floodlight. Torque to 19 in.-lbs. (2.2 N-m).
5.
Install floodlight per above instructions.
•
Wire guard catalog number: P62.
NOTE:
Guard can be installed before or after floodlight has been in operation.
Figure 6
Figure 8
DIMENSIONS
Eaton’s Crouse-Hinds Division
IF 1848
1201 Wolf Street, Syracuse, New York 13208 • U.S.A.
Revision 1
Copyright
©
2019
New 03/19
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In
accordance with Eaton’s Crouse-Hinds Division’s “Terms and Conditions of Sale,” and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended
use and assumes all risk and liability whatsoever in connection therewith.
Figure 5
Visor screws
With Visor and Guard
Visor
With Guard Only
Figure 7
Wire guard
screws
Guard
