background image

AUSTRALIA

MTL Instruments Pty Ltd,  

10 Kent Road, Mascot, New South Wales, 2020, Australia
Tel: +61 1300 308 374 Fax: +61 1300 308 463

E-mail: [email protected]

BeNeLux

MTL Instruments BV

Ambacht 6, 5301 KW Zaltbommel

The Netherlands
Tel: +31 (0)418 570290  Fax: +31 (0)418 541044

E-mail: [email protected]

CHINA

Cooper Electric (Shanghai) Co. Ltd

955 Shengli Road, Heqing Industrial Park

Pudong New Area, Shanghai 201201
Tel: +86 21 2899 3817 Fax: +86 21 2899 3992

E-mail: [email protected]

FRANCE

MTL Instruments sarl,

7 rue des Rosiéristes, 69410 Champagne au Mont d’Or

France
Tel: +33 (0)4 37 46 16 53 Fax: +33 (0)4 37 46 17 20

E-mail: [email protected]

GERMANY

MTL Instruments GmbH, 

Heinrich-Hertz-Str. 12, 50170 Kerpen, Germany
Tel: +49 (0)22 73 98 12 - 0 Fax: +49 (0)22 73 98 12 - 2 00

E-mail: [email protected]

INDIA

MTL India, 

No.36, Nehru Street, Off Old Mahabalipuram Road

Sholinganallur, Chennai - 600 119, India
Tel: +91 (0) 44 24501660 /24501857 Fax: +91 (0) 44 24501463

E-mail: [email protected]

ITALY

MTL Italia srl, 

Via San Bovio, 3, 20090 Segrate, Milano, Italy
Tel: +39 02 959501 Fax: +39 02 95950759

E-mail: [email protected]

JAPAN

Cooper Crouse-Hinds Japan KK, 

MT Building 3F, 2-7-5 Shiba Daimon, Minato-ku,

Tokyo, Japan 105-0012
Tel: +81 (0)3 6430 3128 Fax: +81 (0)3 6430 3129

E-mail: [email protected]

NORWAY

Norex AS

Fekjan 7c, Postboks 147,  

N-1378 Nesbru, Norway 
Tel: +47 66 77 43 80 Fax: +47 66 84 55 33

E-mail: [email protected]

RUSSIA

Cooper Industries Russia LLC

Elektrozavodskaya Str 33

Building 4

Moscow 107076, Russia 
Tel: +7 (495) 981 3770 Fax: +7 (495) 981 3771

E-mail: [email protected]

SINGAPORE

Cooper Crouse-Hinds Pte Ltd

No 2 Serangoon North Avenue 5, #06-01 Fu Yu Building

Singapore 554911
Tel: +65 6 645 9864 / 5 Fax: +65 6 487 7997

E-mail: [email protected]

SOUTH KOREA

Cooper Crouse-Hinds Korea

7F. Parkland Building 237-11 Nonhyun-dong Gangnam-gu,

Seoul 135-546, South Korea.
Tel: +82 6380 4805 Fax: +82 6380 4839

E-mail: [email protected] 

UNITED ARAB EMIRATES

Cooper Industries/Eaton Corporation  

Office 205/206, 2nd Floor SJ Towers, off. Old Airport Road,  

Abu Dhabi, United Arab Emirates
Tel: +971 2 44 66 840 Fax: +971 2 44 66 841

E-mail: [email protected]

UNITED KINGDOM

Eaton Electric Ltd, 

Great Marlings, Butterfield, Luton

Beds LU2 8DL
Tel: +44 (0)1582 723633 Fax: +44 (0)1582 422283

E-mail: [email protected]

AMERICAS

Cooper Crouse-Hinds MTL Inc. 

3413 N. Sam Houston Parkway W.

Suite 200, Houston TX 77086, USA
Tel: +1 281-571-8065 Fax: +1 281-571-8069

E-mail: [email protected]

Eaton Electric Limited,

 

Great Marlings, Butterfield, Luton
Beds, LU2 8DL, UK.
Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283
E-mail: [email protected]
www.mtl-inst.com

© 2016 Eaton

All Rights Reserved

Publication No. 

INM 937x-FB2-Px-SS Rev 1 241116

November 2016

The given data is only intended as a product 

description and should not be regarded as a legal 

warranty of properties or guarantee. In the interest 

of further technical developments, we reserve the 

right to make design changes.

EUROPE (EMEA): 

+44 (0)1582 723633 
[email protected]

THE AMERICAS: 

+1 800 835 7075 

 

[email protected]

ASIA-PACIFIC: 

+65 6645 9864 / 6645 9865 
[email protected]

Summary of Contents for MTL 937 Series





























Reviews: