Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
DataPort 2 Bay or 4 Bay SATA or SAS Enclosures
with Removable Drive Carriers
Package Contents
DataPort 2 Bay Enclosure
1 - DataPort 2 Bay Enclosure
2 - Carrier & Frame Assemblies
2 - Key Sets
2 - Screw Kits
1 - Power Cable
The DataPort Enclosures with removable drive carriers support up to
four (4) SATA or SAS hard drives. The DataPort Enclosures require a
multi-lane cable with an SFF-8470 InfiniBand connector.
NOTE:
The DataPort Enclosure does not include the required
external enclosure to host cable.
The DataPort Enclosure supports two different multi-lane cables, the
SFF-8470 (InfiniBand) to SFF-8470 (InfiniBand) cable (CRU PN 7366-700-
03) or the SFF-8470 (InfiniBand) to SFF-8088 (Mini-SAS) cable (CRU PN
7366-701-01). Consult your host bus adapter manual to determine which
interface it supports.
For internal host support CRU offers a cable assembly kit. The 4x SATA
to SFF-8470 (InfiniBand) PCI host adapter with four (4) SATA data cables
and SFF-8470 (InfiniBand) to SFF-8470 (InfiniBand) external cable (CRU
part number 7100-800-10) will provide the end to end cabling required
to set up the DataPort Enclosure.
These cables are available through CRU’s authorized resellers or direct
from CRU at www.CRU-DataPortStore.com.
Hard Drive Installation
1. Remove the drive cover from the carrier.
2. Carefully insert the drive into the carrier. Slide the drive towards the
Drive Carrier Board, so that the I/O connector on the drive mates with
the connector on the Drive Carrier Board. Hold the drive in place and
turn the drive/carrier assembly over.
3. Fasten the drive into place with four (4) provided screws. Some drives
may require minor adjustment before securing into carrier with screws.
4. Install the drive cover and secure with two (2) provided screws.
Figure 1: Installing Hard Drive (DE110 carrier shown)
SAS or SATA
Drive
(not included)
Drive Carrier
Drive Board
Carrier
Hard Drive
Mounting
Screws (4 each)
DataPort 4 Bay Enclosure
1 - DataPort 4 Bay Enclosure
4 - Carrier & Frame Assemblies
4 - Key Sets
4 - Screw Kits
1 - Power Cable
0043-7120-5240
4 Bay SAS/SATA Enclosure w/ DataPort 10s
0023-7120-5220
2 Bay SAS/SATA Enclosure w/ DataPort 10s
0043-7180-5240
4 Bay SAS/SATA Enclosure w/ Data Express DX115s
0023-7180-5220
2 Bay SAS/SATA Enclosure w/ Data Express DX115s
0043-5960-5240
4 Bay SATA Enclosure w/ Data Express DE110s
This install guide is intended to support DataPort 2 Bay or 4 Bay
Multi-lane Enclosures in the following configurations:
