OPTICAL CABLE CLOSURE
Fiber Optic Splice Closure
(
VSOF-BS606G) User Manual
VISSEM VSOF--BS606G-Manual Rev.0 TEL: 031-288-3481 FAX: 031-283-7844
All rights reserved by VISSEM Electronics Co. Ltd.
1. Rotation Rocking-Lever
Rotate the Locking-Lever through 90 degree.
2. Closure Dismantle
Open the Clip-Handle by using screwdriver or bare
hand.
After that dismantle the closure Body
* When you open the Clip-Handle, it can be clacked
3. Aerial Hanger Mounting to Closure
Mount the aerial hanger to the joint part of lower
main body with the using hexagonal headed bolt-
(M6*L25).
4. Aerial Hanger Mounting to Messenger
Wire
Lower main body should be fixed on the messenger
wire splicing point in the use of aerial hanger.
1
2
3
4
5. Removing Sheath of Optical Cable
Remove 1.2m of the cable sheath from Cable end.
Remove the aramid and fiber yams.
9. Opening the Tray-Supporter
Push the hook of Tray-Supporter and open the
Tray-Supporter.
6. Cutting Tension Member
Cut Tension member 10cm from the Cutting Plane.
* Be careful not to cut loose tube.
10. Cutting Sheath Gasket
Cut the A line of Sheath Gasket
by using cutting tool such as
scissors.
* make a cutting surface clearly
when you cutting
7. Removing Loose Tube
Remove all but 8cm of each loose tube.
Clean the remaining loose tube, exposed fiber and
strength member with a cloth and jelly cleaner.
11. Removing Sheath Holder (Top)
With the aid of a screwdriver, loosen the two bolt of
Sheath Holder at each end.
Afterward remove the sheath holder (top).
* Keep the sheath holder (top) carefully not to drop.
8. Inserting Unit Protection Tube
Insert one Unit Protection Tube on loose tube and
slide it down to the sheath Cutting Plane.
Wrap cable with tape to hold Unit Protection Tube.
* Length of Protection Tube provided : 55cm
12. Applying High Vacuum Grease
Apply the high vacuum grease on the cable for
excellent water-proof.
Clip-Handle
Cover
Body
Tray Ass`y
Tray-Supporter
Protection Tube Guide
T/M
Steel band bracket
Sheath Holder
Sheath Gasket
Sheath Holder
(Top) (Φ12 ~ Φ20)
Sheath Holder
(Bottom)
Blot
(M5*L40)
High Vacuum
Grease
Grease Brush
Cable Tie
Splice Protection
Sleeve
Insulation
tape
Aerial Hanger
Bolt
(M6*L25)
Silica Gel
Unit Protection Tube
10cm
8cm
