5 Installation
5.4 Mounting
46
MICRO PANEL XV-152
12/2011 MN04802006Z-EN
www.eaton.com
5.4.1
Mounting the device
1
Select the mounting position of the device as described in Chapter 5.2.2 Requirements for the
mounting position,
22.
2
Prepare a mounting cutout for the device at the selected position:
Mounting cutout:
5.7" devices: 198
×
142 mm (±1 mm)
8.4" devices: 261
×
194 mm (±1 mm)
10.4" devices: 329
×
238 mm (±1 mm)
Material thickness at the mounting cutout 2…5 mm
Eight retaining brackets with a threaded pin each are required for mounting in accor-
dance with IP65 / NEMA 4X and for use in potentially explosive atmospheres. If needed,
please order additional retaining brackets with threaded pins from your supplier.
Fig. 23 Mounting cutout for 5.7" devices
Fig. 24 Mounting cutout for 8.4" devices
Fig. 25 Mounting cutout for 10.4" devices
198.0
+1/-1
142.0
+1/-1
261.0
+1/-1
194.0
+1/-1
329.0
+1/-1
238.0
+1/-1
