5 Installation
5.3 Interfaces
MICRO PANEL XV-152
12/2011 MN04802006Z-EN
www.eaton.com
33
5.3.8.2
Operating and indication elements of the SmartWire-DT Master interface
Tab. 12 Operating and indication elements of the SmartWire-DT Master interface
Fig. 13 SmartWire-DT Master interface
Element
Function
A POW/AUX interface
Power supply interface for SmartWire-DT
(
→
Chapter 5.3.8.3,
34)
B POW LED
Lit if the SmartWire-DT netwerk is supplied with current.
C SWD LED
Indicates whether the physical structure of the SmartWire-DT network
matches the target configuration. Each time the power supply is
switched on, the configurations are compared (
→
Chapter 5.3.8.5,
36).
D Config LED
Indicates whether the project configuration of the SWD master defined
in the PLC matches the target configuration of the SmartWire-DT
network stored in the device. Each time the power supply is switched
on, the configurations are compared (
→
Chapter 5.3.8.5,
36).
E Configuration button
Configuring the SmartWire-DT network.
F SWD interface
SmartWire-DT interface (
→
Chapter 5.3.8.4,
35)
